Miele G 7881 Installation And Operating Instructions Manual page 59

Fault
The rinse program is
interrupted and the
"Fill/Drain" indicator
light is flashing.
The water in the wash
cabinet does not get
hot; the program
sequence lasts too
long.
Cause
Error message: F..A:
There is a problem with the
water outflow.
Error message: F01 - F03,
F18, F19
The washer-disinfector is
equipped with a
temperature sensor that
switches off the heater when
it threatens to overheat.
Overheating can occur
when, e.g., large items
cover the heating elements
or when the filters in the
wash cabinet are blocked.
Troubleshooting
Solution
Before addressing the
error:
– Turn the program
selector to the 12
o'clock position f. The
error message is
erased.
– Press the "ON/OFF"
button to switch off the
machine.
– Clean the filter
combination in the wash
cabinet.
– Clean the drain pump.
– Clean the non-return
valve.
– Remove any kinks in the
drain hose.
Then:
– Switch the
washer-disinfector on.
– Drain the water.
– Restart the program.
Remove the underlying
cause:
– Clean the filter
combination in the wash
cabinet.
– Rearrange the items.
– Reset the temperature
sensor (see "How to
correct errors -
Temperature sensor"
59