Download  Print this page

Data Transfer (optional) - Miele G 7881 Installation And Operating Instructions Manual

Washer-disinfector.
Hide thumbs

Advertisement

The lab washer is equipped with an
interface socket so that data can be
transferred from Novotronic to a log
printer.
Please contact Miele Technical Service
to order printer cables.
The serial interface is RS 232
compatible.
Various printer types with
Epson-compatible fonts can be used
for printing.
Miele Technical Service maintains a list
of recommended printers.
Pin assignment 9-pin sub-D connector:
5
GND (ground)
3
TXD (send)
1-4-6
(bridge)
7-8
(CTS)
,
Printer initialization must only be
performed by Miele. Consult
Technical Service using the contact
information on that back of this
manual.

Data transfer (optional)

During program operation a protocol is
prepared. It can be printed using an
external printer.
The protocol contains the following
information:
– date and device number
– program start time and name
– rinse blocks used
– dosage system with dosage
temperature and target dosage
amount
– target values for temperature and
holding times
– minimal temperature during the
holding time
– all errors (e.g., water supply defect)
– program end time
– warnings, e.g., salt required.
47

Advertisement

Table of Contents

   Also See for Miele G 7881

   Related Manuals for Miele G 7881

   Related Content for Miele G 7881

Comments to this Manuals

Symbols: 0
Latest comments: