Body Solid Endurance B5R User Manual page 8

Step 2
NOTE:
Some hardware components may be pre-assembled. Nylon lock
nuts not fully screw onto bolts, they must be wrench tighten to fully
go on.
2A. Attach the Seat Adjustment Levers (#19 & #36) to the Seat
Frame (M) using:
Four M6x16mm Socket Head Cap Screw (#37)
Four M6 Washer (#38)
2B. Attach the Back Seat (#52) to the Seat frame (M) using:
One Pin Shaft (#56)
Two M10 Nylon Lock Nut (#20)
Two M10 Washer (#21)
2C. Attach the Bracket End of Back Seat (#52) to the Air Spring (#49)
using:
Two Rubber Washer (#51)
One M8x45mm Hex Head Bolt (#50)
Two M8 Washer (#28)
One M8 Nylon Lock Nut (#39)
8