Body Solid Endurance B5R User Manual page 6

Step 1
NOTE:
Some hardware components may be pre-assembled. Nylon lock
nuts not fully screw onto bolts, they must be wrench tighten to fully
go on.
1A. Install two Rear Leg End Caps (#12) to the Rear Leg (B) using:
Four M5x10mm Pan Head Phillips Screws (#11)
1B. Install the Adjustable Levelers (#9) onto the Rear Leg (B)
1C. Insert the Steel Plate (#30) into the U-Bracket of MAIN FRAME (A)
1D. Uninstall Stabilizer Tube (#118) by removing
Two M12x25mm Hex Head Bolt (#16)
Two M12 Lock Washer (#14)
Two M12 Washer (#15)
1E. Install the Rear Leg (B) to the Steel Plate (#30) and U-Bracket of
MAIN FRAME (A) using:
Two M12x25mm Hex Head Bolt (#16)
Two M12 Lock Washer (#14)
Two M12 Washer (#15)
NOTE: A second person is recommended to lift up the rear of MAIN
FRAME A) for installing the Rear Leg (B).
1F. Install the Rear Leg Cover (G) to the MAIN FRAME (A) using:
Four ST4.2x18mm Pan Head Phillips Screws (#8)
6