Body Solid Endurance B5R User Manual page 10

Step 3
NOTE:
Some hardware components may be pre-assembled. Nylon lock
nuts not fully screw onto bolts, they must be wrench tighten to fully
go on.
3A. Connect Heart Rate Cables (#54) to the Heart Rate Cables (#17) on
the Seat Frame.
3B. Attach Seat Bar Handle (D) to the Seat Frame (M) using:
Four M8x12mm Button Head Cap Screw (#27)
Two M8 Washer (#28)
3C. Attach Seat Pad (#32) to the Seat Frame (M) using:
Four M8x16mm Hex Head Bolt (#33)
Four M8 Washer (#28)
10