Before You Begin; Assembly - Body Solid Endurance B5R User Manual

The Endurance ® B5R is carefully tested and inspected before shipment. We have
shipped the unit in several pieces that require assembly. Carefully unpack the unit in
a clear area and lay the pieces on the floor near the area where you plan to use the
equipment. Remove the packing material. Do not dispose of the packing material
until assembly is complete and the unit is working properly. Place the unit on a clean
level surface for assembly. Before assembling, the unit should be placed as close as
possible to its final location. Be careful to assemble all components in the sequence
presented in this guide.
PErSonAL SAFETy DUrIng ASSEMBLy
It is strongly recommended that a qualified dealer assemble the equipment.
m
Assistance is required.
Before beginning assembly, please take the time to read the instructions
m
thoroughly.
Read each step in the assembly instructions and follow the steps in sequence.
m
Do not skip ahead. If you skip ahead, you may learn later that you have to
disassemble components and that you may have damaged the equipment
which will void the warranty.
Assemble and operate the Endurance ® Recumbent bike on a solid, level
m
surface.
Locate the unit a few feet from the walls or furniture to provide easy access.
AFTEr ASSEMBLy
Once the unit is assembled, you should check all functions to ensure correct opera-
tion. If you experience problems, first recheck the assembly instructions to locate
any possible errors made during assembly. If you are unable to correct the problem,
call the dealer from whom you purchased the machine or call Endurance ® Customer
Tech Support Hot Line Toll Free at: 1-800-556-3113.

Before You Begin

5