Body Solid Endurance B5R User Manual page 14

Step 5
NOTE:
Some hardware components may be pre-assembled. Nylon lock
nuts not fully screw onto bolts, they must be wrench tighten to fully
go on.
5A. Attach L Shape Holder (T) to Console (L) using
Two M5x10mm Phillips Head Screw (#11)
5B. Connect Heart Rate Cables (22) to the Heart Rate Cables (#112) on
the Console (L).
5C. Connect Console Harness (23) to the Console Harness (#113)
on the Console (L).
5D. Attach Console (L) to UPRIGHT FRAME (C) using:
Four M5x10mm Phillips Head Screw (#11)
14