Using The Dv Cable For Recording (Digital Dubbing) - Panasonic NV-GS85GC Operating Instructions Manual

LSQT1123_ENG.book 104 ページ ２００６年１２月２５日 月曜日 午前９時４５分
≥If you record (dub) images onto another video
device and then play them back on a wide-
screen TV, the images may be stretched
vertically. In this case, refer to the operating
instructions for the device that you are recording
(dubbing) to or read the operating instructions
for the TV and set to 16:9 (full).
≥For more information, refer to the operating
instructions for your TV set and recorder.
≥When you do not need functional indications or
date and time indication, respectively set
[SETUP] >> [DISPLAY] >> [OFF] or set [BASIC]
>> [DATE/TIME] >> [OFF] in the Tape Playback
Mode.
(When you connect the movie camera and a
recorder with the DV cable, these indications
may not appear.)
ª
When neither image nor sound from
the movie camera is output to the TV
set
≥Check that the plugs are inserted as far as they
go.
≥Check the [12bit AUDIO] settings. (
≥Check the connected terminal.
Using the DV Cable for Recording
(Digital Dubbing)
By connecting other digital video equipment with
DV terminal and the movie camera by using the
DV cable VW-CD1E (optional) 1, high-image-
quality dubbing can be done in digital format.
≥Set to Tape Playback Mode.
(Player/recorder)
1
Connect the movie camera and digital video
equipment with the DV cable.
2
Set [ADVANCED] >> [REC STDBY] >> [YES].
(Recorder)
≥You do not have to follow this step when the
remote control is used in the digital dubbing.
3
Start playback. (Player)
4
Start recording. (Recorder)
104
LSQT1123
Edit mode
When operating with the main unit:
Move the joystick up to select [¥/;] icon.
When operating with the remote control:
While pressing the [¥REC] button on the remote
control, press the [PLAY 1] button.
5
Move the joystick up to select the [¥/;]
icon again or press the [;] button on the
remote control to stop recording.
)
-105-
(Recorder)
6
Stop playback. (Player)
ª To cancel the standby for recording
When the camera is standby for recording, move
the joystick down and select the [∫] icon or press
the [∫] button on the remote control.
≥Do not plug or unplug the DV cable during
dubbing, or the dubbing may not be completed
properly.
≥If a picture (bilingual video, etc.) containing main
sound and sub sound has been dubbed, select
the desired sound by [SETUP] >> [AUDIO OUT]
on playback.
≥Even if you use a device equipped with DV
terminals such as IEEE1394, you may not be
able to perform digital dubbing in some cases.
For more information, see the instructions for
1
equipment connected.
≥Regardless of the menu settings on the
recorder, digital dubbing is carried out in the
same mode as the [AUDIO REC] mode of the
playback tape.
≥The images on the recorder monitor may be
disturbed, but it does not affect the recorded
images.
≥If a picture containing a copyright protection
signal (copy guard) is recorded by the movie
camera, the picture is distorted by mosaic-like
patterns at playback.
≥Disconnect the USB cable since input signals
from the external input terminal cannot be