Program Personal Speed Dial Names For Stations - Samsung OfficeServ 100 System Administration Manual

Samsung OfficeServ 100
• PROGRAM PERSONAL SPEED DIAL NAMES
FOR STATIONS
[MMC 106]
Individual station users can program their own speed dial names, but in cases where this is not
practical or not straightforward (e.g. for single line telephones), this program allows a system ad-
ministrator to view or change any station's speed dial names. Station speed dial codes are 00–49
(or 000–049). Each station can have up to 10 names (00–09) by default, although more can be as-
signed, in blocks of 10, up to a maximum of 50 names.
Open customer programming and follow these instructions.
ACTION
1. Press Transfer (or TRSF) 106
Display shows
2. Dial the station number (e.g., 205) OR
press the VOLUME keys to select the station
and press the right soft key to move the
cursor
If the selected station has no speed dial
bins, this display will be shown and a
new station may be selected
3. Dial the speed dial location (e.g., 05) OR
press the VOLUME keys to scroll through the
speed dial numbers and use the right soft
key to move the cursor
4. Enter the name using the procedure described
in Program Station Names
5. Press the F key to return to
Speed Dial Numbers For Stations
OR press the right soft key to return to step 2
OR press the left soft key to return to step 3
OR press Transfer (or TRSF) to store and exit programming
OR press SPEAKER to store and advance to the
next program
22
Program Personal
System Administration Guide
DISPLAY
[201] SPEED NAME
00 :
[205] SPEED NAME
00 :
[205] SPEED DIAL
SPDBLK NOT EXIST
[205] SPEED NAME
05 : _
[205] SPEED NAME
05 : SAM SMITH