Using The Tie Line; Outgoing; Incoming; In And Out On Tie Line - Samsung OfficeServ 100 System Administration Manual

Samsung OfficeServ 100

USING THE TIE LINE

OUTGOING

Your office can be connected to another system with a tie line. Use this line to make calls to sta-
tions in the other system. If programming allows, you can access lines in the other system to make
outside calls. Tie line calls can be put on hold, transferred and conferenced in the same manner as
other outside calls.
•
Lift the handset or press the SPEAKER key.
•
Dial the tieline access code or press the tie line key (if programmed).
•
When you receive dial tone from the other system, you can dial extension numbers or access
outside lines. You must know the extension numbers and the line access codes for the other
system.
Note: Outgoing calls are controlled by the station's dialling class.

INCOMING

Station users in the other system can access the tie line and make intercom calls to stations in your
system.
Answer tie line calls ringing at your station as you would any other outside call. They can be put on
hold, transferred and conferenced in the same manner as other outside calls.

IN AND OUT ON TIE LINE

Users accessing the tie line from the other system can get a line in your system and make outgoing
calls. These calls can be controlled by assigning a dialling class to the tie line. Your system installer
must do this for you.
System Administration Guide
7