Auto Timer; Timer Function; Viewing Message Indications; Alarm Reminder Messages - Samsung DS 24D User Manual

AUTO TIMER

Display keyset users may have the timer automatically start when they
answer incoming calls or after a short delay on an outgoing call.
• With the handset on-hook, press TRANSFER and then dial 110.
• Dial 11 to turn the auto timer on or 10 to turn it off.
• Press TRANSFER to store your selection.

TIMER FUNCTION

Display keyset users may use this feature as a simple stopwatch.
• When the keyset is idle, press the TIMER button to start timing.
• Press the TIMER button again to stop timing.
• Read the elapsed time in the display.
• Lift the handset and replace it. The display will return to date and time.

VIEWING MESSAGE INDICATIONS

You can view all of your message indications before you return them:
• With the handset on-hook, press the MSG key with the red flashing light.
• The first station that left a message indication will be displayed.
• Press the UP and DOWN arrows to scroll through the stations that left
message indications. Use the soft keys to reply, clear or advance to the
next message.
• Press the SPEAKER key to return your keyset to the idle condition.

ALARM REMINDER MESSAGES

When you use the alarm/appointment reminder feature, you create a 16
character reminder message. When the alarm rings, your message will ap-
pear instead of [ALARM REMINDER]. To program reminder messages:
• Press TRANSFER and then dial 116.
• Dial the alarm number 1 or 2.
• Dial the time you want the alarm to go off. Enter the time as HHMM
(hours and minutes) using the 24 hour clock.
• Dial 0 (NOT SET), 1 (TODAY) or 2 (DAILY) to select the alarm type.
• Write your message using the dial pad keys. Each press of a key selects
a character. Pressing the next key moves the cursor to the next position.
For example, if your message is "TAKE MEDICATION," press 8 once to
get the letter "T." Press 2 once to get "A." Press 5 twice to get "K." Con-
tinue selecting characters from the following table to complete your
message.
• Press the TRANSFER key to store the alarm and reminder message.
• Repeat for each alarm if needed.
COUNT
DIAL 0
DIAL 1
DIAL 2
DIAL 3
DIAL 4
DIAL 5
DIAL 6
DIAL 7
DIAL 8
DIAL 9
DIAL
NOTES:
1. When the character you want appears on the same dial pad key as the
previous character, press UP to move the cursor one space to the right.
2. Other symbols are available for DIAL #.
To cancel an individual alarm and reminder message:
• Press TRANSFER and then dial 112.
• Dial alarm number 1 or 2.
• Press the HOLD key.
• Press the TRANSFER key.

PERSONAL SPEED DIAL NAMES

Each personal speed dial number can have an 11 character name assigned
to it. This name is used to select the speed dial bin when you are dialing by
directory.
• Press TRANSFER and then dial 106.
• Dial the speed dial bin number 00–49.
• Write your message using the procedure described in Alarm Reminder
Messages.
• Press the TRANSFER key to store the speed dial name.
• Repeat for each speed dial bin if necessary.
35 36
1 2 3
< > .
space ? ,
A B C
D E F
G H I
J K L
M N O
P Q R
T U V
W X Y
: = [
4 5
) 0
! 1
@ 2
# 3
$ 4
% 5
^ 6
S 7
8
Z 9
]