Program Personal Speed Dial Names For Stations - Samsung DCS-408 System Administration Manual

Samsung
DCS-408 & 408i
OR
Press the right soft key to return to step 2 to select a new station
OR
Press TRSF to store and exit programming
OR
Press SPEAKER to store and advance to next MMC
❍ ❍ ❍ ❍ Program Personal Speed Dial Names For Stations
[MMC 106]
Associating names with speed dial numbers can be done at the same time as you pro-
gram personal speed dial numbers (using the 'F' key) or can be done separately, as
described here. The procedure for entering names is the same as described in Pro-
gram Station Names, earlier in this section.
Program Keys
VOLUME UP & DOWN - Used to scroll through options.
KEYPAD - Used to enter selections.
SOFT KEYS - Move cursor left and right.
SPEAKER - Used to store data and advance to next program.
HOLD - Used to clear previous entry.
'F' - Used to return to personal speed dial number programming.
ACTION
1. Open customer programming and select
2. Dial the station number (e.g., 25)
OR
Press UP or DOWN to select the station and press the right
soft key to move the cursor
If the selected station has no speed dial bins, this display will
be shown and a new station may be selected
3. Enter the speed dial number (e.g., 05)
OR
Press UP or DOWN to scroll through the location numbers
and use the right soft key to move the cursor
OR
Press the left soft key to return to step 2
4. Enter the name (e.g. Sam Smith)
If you make a mistake, either press HOLD to clear the entire
entry or use the DOWN key to move the cursor back
5. If you used the F key to enter this MMC from Program
Personal Speed Dial Numbers For Stations, press the F key
again to return to that program
OR
Press the left soft key to return to step 3
OR
Press the right soft key to return to step 2
OR
System Administration Guide
DISPLAY
106
[21] SPEED NAME
00 :
[25] SPEED NAME
00 :
[25] SPEED NAME
NO SPEED BLOCK
[25] SPEED NAME
05 : _
[25] SPEED NAME
05 : SAM SMITH
21
November 2001