Reset Station Passcodes To Default - Samsung OfficeServ 100 System Administration Manual

Samsung OfficeServ 100

RESET STATION PASSCODES TO DEFAULT

[MMC 101]
Individual keyset users can set or change their own individual passcodes. These passcodes are
used to lock and unlock keysets, override toll restriction and access the DISA feature. At times, it
may be necessary for the system administrator to reset a station's passcode to default value
"1234." This program cannot be used to display passcodes, only to reset them.
Open customer-level programming and follow these instructions.
ACTION
1. Press Transfer (or TRSF) 101
Display shows
2. Dial the station number (e.g., 205)
OR press the VOLUME keys to scroll through
the keyset numbers and press the right soft key
to move the cursor
3. Press HOLD to reset the passcode
4. Press the right soft key to return to step 2
OR press Transfer (or TRSF) to store and exit
programming OR press SPEAKER to
store and advance to the next program
System Administration Guide
DISPLAY
[201] P A S S C O D E
PASSCODE: ∗∗∗∗
[205] P A S S C O D E
PASSCODE: ∗∗∗∗
[205] P A S S C O D E
PASSCODE: 1 2 3 4
13