Cleaning - VTL TL6.5 Owner's Manual

Signature line stage preamplifier
Table of Contents

Advertisement

downward while turning it in the clockwise direction to lock it in place. Use the same
procedure to replace the output stage protection fuses.
your VTL dealer or the VTL factory service department.
problem that caused the fuse to blow in the first place. Consult your
dealer or the VTL factory for service.

Cleaning

Your VTL preamplifier should be dusted occasionally with a damp non-abrasive cloth. Do
not use any solvents for cleaning the front panel, as this can damage the lettering and the
finish. It is recommended that you use a contact cleaner such as Pro-Gold on the input
TL6.5 Preamplifier Owner's Manual
VTL
WARNING: For continued protection against fire
hazard only replace the fuse with the same type and
rating as was originally specified for the TL 6.5. If
you have problems locating the correct fuse contact
Fig 4. Module & Power Supply PCB fuses,
Tube locations
WARNING: Before powering on the TL 6.5 after a
fuse change it is extremely important to find the
44

Advertisement

Table of Contents
loading

Table of Contents