Quick Reference: Special Programming Functions - VTL TL6.5 Owner's Manual

Quick Reference: Special Programming Functions

Function
Enable Trigger Output:
outputs to remotely turn on your system
components that can accept the 12V turn-on.
Disable Trigger Output
Suppress Power on Countdown timer
Set input to Unity Gain (for any input
CD1... Aux)
Remove Unity Gain setting from an input
Set Input Level Offset:
for equalizing volume gain levels between
different inputs that have different output levels,
so that when an input is selected the overall
volume of the system will not change.
TL6.5 Preamplifier Owner's Manual
VTL
Programming Sequence
During the power up 90 to 0 countdown
To set up to 2 Trigger
sequence, user holds down any of Input 1 thru 2
buttons, i.e. CD1, CD2 (for trigger 1 through 2).
To set trigger timer, user rotates control knob
clockwise to 99 maximum (to increase trigger time)
or counter-clockwise to 01 minimum (to decrease
trigger time). No two triggers can be set for the
same turn on time - numerical display skips already
selected trigger times.
To undo the Trigger timer, during 90 to 0
power up sequence, hold the button for the
Trigger output and
counter-clockwise until numerical display shows
OF.
If you do not wish to see the 90 to 0 countdown
when the preamp goes through the power up
sequence, you can suppress the display by pressing
the Mute button during the countdown sequence.
Any programmed trigger indication will be
suppressed also.
While the preamp is in operate mode, select the
input you wish to set to Unity Gain. Then hold the
Mon/Proc button and at the same time press the
input button again. The numeric display changes
to UI to indicate that Unity Gain is set., and the
Mute LED blinks.
While the preamp is in operate mode, select the
input that you wish to reset the Unity Gain. Note
the Mute LED blinks. Hold down the Mon/Proc
button first and then press the input again. The
numeric display changes to indicate the volume for
that input prior to setting Unity Gain.
While the preamp is in operate mode, hold the
Input offsets are used
button of the input you wish to set the Offset, and
rotate the volume control knob at the same time.
The numeric display will now indicate the Offset
value that you wish to set. Release the input button
to complete the setting.
To remove Input level Offset, hold the input
button down and turn the volume control
counterclockwise until numeric display indicates
23
rotate the volume control