Powering The System Off - VTL TL6.5 Owner's Manual

Powering the system off

You may keep your VTL preamplifier and your source components on permanently if you
prefer to keep them warm. If you prefer to keep all your equipment off when not in use
then it is best to follow the correct turn off sequence to avoid power off thumps through
the system. (If the power fails or if you accidentally turn off the preamp before turning the
power amplifiers off, the preamplifier will power down in a muted state and no damage
will be done to your system.)
1. When you're done listening to your system always turn your power amplifier(s) off
first, if not using the trigger function on the TL 6.5.
2. Allow a short time (15 - 20 seconds) for the amplifier(s) to power down before you
turn the preamplifier off. If the trigger function is being used, powering the
preamplifier off will automatically turn off the power amplifier(s).
3. Turn the source components off, if you prefer to keep these off when not in use.
TL6.5 Preamplifier Owner's Manual
VTL
>Version 050529
40