Lighted Handset Keypad - Panasonic KX-TG4000B Operating Instructions Manual

To dial after confirming the
entered number
1
Enter a phone number.
1112222
If you misdial, press
Digits are erased from the right.
To cancel, press
(EXIT)
2
Press .
(TALK)
You can press a line button
instead of pressing
The line number is displayed.
After a few seconds, the display
will show the length of the call.
3
To hang up, press
place the handset on the
charger.
To adjust the receiver
volume
(High, Medium or Low)
Press while talking.
or
Each time you press
volume level will change.
Ex. High
Loud
Low

Lighted handset keypad

The handset dialing buttons will
light when you press a button, and
flash when a call is received. The
lights will go out about 10 seconds
after pressing a button, lifting the
handset off the charger or
answering a call.
To redial the last number
dialed
Press
To redial using the redial list
The last 10 phone numbers dialed
with the handset are stored in the
.
(CLEAR)
redial list.
1. Press
.
The last number dialed is
displayed.
2. Press
number is displayed.
.
(TALK)
You can scroll between numbers by
pressing
To exit the list, press
3. Press
or
(TALK)
To erase an item, repeat steps 1 and
2, and press
If "No items stored" is displayed,
the list is empty.
To put a call on hold
Press
"Hold" and the line number are
or , the
displayed.
The line status icon flashes on the
display.
If a call is kept holding for 30 seconds,
a warning tone will sound. After 2
High minutes the automated attendant will
respond to the caller and he/she can
call the base unit or another handset or
to leave a message following the
Incomplete Call Handling Menu (p. 62).
To release the hold
Press the line button.
The base unit and other handset
users can release the hold by
pressing the line button. If another
phone is connected on the same line,
the hold will also be released by lifting
its handset.
and press
(TALK) (REDIAL)
.
(REDIAL)
until the desired
(REDIAL)
or .
(EXIT)
.
(TALK)
.
(CLEAR)
.
(HOLD)
.
.
27