Table of Contents
Advertisement
PQQX13225ZA-BM-3 01.7.17 8:56 AM y [ W 26
" Making Calls
To put a call on hold
(HOLD/CLEAR)
Press
≥"Hold" is displayed.
≥The called line status indication on the display and
the IN USE/CHARGE/HOLD indicator on the base
unit flash.
≥If you do not press any key for more than 6 minutes, an alarm tone will sound.
≥If you do not press any key for more than 10 minutes after holding a call, a line
will be disconnected.
To release the hold
Press the line button whose status indication is flashing.
≥If another phone is connected on the same line (p. 61), you can also release the
hold by lifting its handset.
Backlit LCD display
The lighted handset display will stay on for a few seconds after pressing a
handset button, lifting the handset off the base unit, hanging up a call or
leaving the programming mode.
Lighted handset keypad
The handset dialing buttons will light when you press a button or lift the
handset off the base unit, and flash when a call is received. The lights will
go out a few seconds after pressing a button, lifting the handset,
answering a call, hanging up a call or leaving the programming mode.
What the line status indications ("[L1]" and "[L2]") on
the display mean
Off
On
Flashing
Flashing quickly
26
.
The line is free.
You are using the line on the handset or parallel
connected telephone.
A call is on hold.
A call is being received.
[L1]
Hold
Advertisement
Table of Contents
