Answering Calls; Lighted Handset Keypad - Panasonic KX-TG2267B Operating Instructions Manual

Answering Calls

When a call is received, the unit rings and "Incoming call" and the
called line are displayed. The called line status indication on the display
and the LINE indicator on the base unit flashes quickly. The line is
automatically selected when you answer the call. (To change the line
selection, see page 54.)
If you subscribe to a Caller ID service, the calling party information will be
displayed after the first ring (p. 28). In order to view the Caller ID
information, please wait until the second ring to answer a call.
Press .
OR
Press , and when the other party answers,
talk into the microphone.
•The called line status indication stops flashing.
•You can also answer a call by pressing any dialing
button (0) to (9), (*) or (#) (Any Key Talk).
•You may answer a call by pressing the called line button instead of
•You can select the ringer volume while a call is being received. Press Ö or Ñ
while the handset is just ringing. To set to OFF, press and hold Ö.
Auto Talk
If you set the Auto Talk feature to ON
(p. 19), you can answer a call by lifting the
handset off the base unit without pressing
or .
•When the ringer volume is set to OFF, the selected line(s) will not ring (p. 20).

Lighted handset keypad

The handset dialing buttons will light when you press a button or lift the
handset off the base unit. They will flash when a call is received. The
lights will go out a few seconds after pressing a button, lifting the handset
off the base unit, hanging up a call or leaving the programming mode.
Backlit LCD display
The lighted handset display will stay on for a few seconds after pressing a
handset button, lifting the handset off the base unit, hanging up a call or
leaving the programming mode.
For assistance, please call: 1-800-211-PANA(7262)
Microphone
.
27