Selecting The Number Of Rings - Panasonic KX-TG2680N Operating Instructions Manual

Preparing the Answering System

Selecting the Number of Rings

You can select the number of times the unit rings before the answering
system answers a call, from "2" to "7" or "Toll saver"*.
Your phone comes from the factory set to "3".
Press
1
(FUNCTION/CH)
2 Press
Ö
points to "Program".
Press
3
á
4 Press
Ö
points to "TAD program".
Press
5
á
•The base unit display shows programming
options.
Press
6
(2)
•The current setting is displayed on the base
unit.
Press
7
(0)
0: Selects "Toll saver"*.
2–7: The unit will answer after the selected number of rings.
•The unit will announce a caller's name after the 2nd ring (Talking Caller ID
feature, p. 34). To listen to the name announcements, do not select "2".
8 Press
á
•A beep sounds.
•To return to the standby mode, press (OFF).
*Toll saver
When you call the unit from a touch tone telephone:
If the unit answers on the 3rd ring, there is at least one new message.
If the unit answers on the 5th ring, there are no new messages.
Hang up when you hear the 4th ring. This will save you the toll
charge for the call.
26
.
or repeatedly until the arrow
Ñ
(Yes key).
or repeatedly until the arrow
Ñ
(Yes key).
.
, or to to set the number of rings.
(2) (7)
(Save key).
H
Save directory
Ringer volume
GF H
H
Program
Calling pager
GF H
H
Save DIRECT#
Set flash time
GF H
Set dial mode
H
TAD program
GF H
Answering
system setting.
See base unit.
Base unit display
Number of rings
:3
=Yes
=Yes
=Yes
=Yes