Direct Commands - Panasonic KX-TG2680N Operating Instructions Manual

Direct commands

NEW MESSAGE
PLAYBACK
ALL MESSAGE
PLAYBACK
REPEAT
(During playback)
SKIP
(During playback)
STOP
ERASING A
SPECIFIC
MESSAGE
(During playback)
ERASING ALL
MESSAGES
PAGER CALL
ON/OFF
ANSWERING
SYSTEM OFF
ANSWERING
SYSTEM ON
•Only new messages are played back.
(4)
•All messages are played back.
(5)
•The current message is repeated.
(1)
•You can also press
message.
•The current message is skipped.
(2)
The next message is played.
•You can also press
message.
•Operation is stopped temporarily.
(9)
•To resume operation, enter a direct
command within 15 seconds, or the
voice menu will start (p. 74).
•The current message is erased.
(*) (4)
•A short beep will sound and the next
message will be played.
•All recorded messages are erased.
(*) (5)
•A long beep sounds and "No messages" is
heard.
•Each time you press
(3)
turn on or off.
•If you have not stored a pager number,
" PAGER
base unit, and the mode will not turn on.
•"Answer off" is heard and the answering
(0)
system is turned off.
•"Answer set" is heard and the answering
(8)
system is turned on.
to repeat a
Ü
to skip a
á
, the mode will
(3)
" will not be displayed on the
75