Setting the Talking Caller ID Feature
After subscribing to a Caller ID service, the handset and the base unit will
display a caller's name and phone number (p. 34). Name and telephone
number Caller ID service is required. This Talking Caller ID feature allows
the unit to announce a displayed caller's name through the handset and
base unit speakers while a call is being received (p. 34). You can listen to
the caller's name instead of looking at the display.
For example, if you receive a call from "JOHN SMITH", the unit will
display "SMITH, JOHN" and announce "Call from SMITH, JOHN"
repeatedly until you or the answering system answer the call.
Your unit comes with this feature turned ON, but you may turn it OFF.
Make sure the unit is in the standby mode initially.
1
Press
(FUNCTION/CH)
2
Press
or
Ö
points to "Program".
3
Press
(Yes key).
á
4
Press
or
Ö
points to "Talk Caller ID".
5
Press
(Yes key).
á
6
Press
or
Ö
Press
(Save key).
7
á
•A beep sounds.
•To return to the standby mode, press (OFF).
•You can exit the programming mode any time by pressing (OFF).
.
repeatedly until the arrow
Ñ
repeatedly until the arrow
Ñ
to select "Off" or "On".
Ñ
H
Program
Calling pager
GF
H
=Yes
H
Talk Caller ID
GF
H
=Yes
Talk Caller ID
:On
GF
H
=Save
Talk Caller ID
:Off
GF
H
=Save
Talk Caller ID
:Off
17