Table of Contents
Advertisement
With the Base Unit
Connecting the headset to the base unit
Connect the headset to the headset jack as shown.
(DIGITAL!SP-PHONE/HEADSET)
Making/Answering calls
1
Press
(DIGITAL!SP-PHONE/HEADSET)
•If you misdial when making a call, press (DIGITAL!SP-PHONE/HEADSET)
twice and dial again.
2
To hang up, press
To adjust the headset receiver volume (High, Medium or Low):
While using the headset, press
To switch to the speakerphone while using the headset:
"EXIT=SP-phone" is displayed. Press
To return to the headset, press
•Each time you press (EXIT), the call will switch to the headset or
speakerphone. While in the speakerphone mode, "EXIT=Headset" is
displayed.
•During a conversation using the headset, you can switch the call to the handset
by lifting it off the cradle.
•If you disconnect the headset during a conversation, you can continue the
conversation with the speakerphone.
(EXIT)
Headset
Jack
(DIGITAL!SP-PHONE/HEADSET)
or
Ñ
Ö
(EXIT)
Fasten the headset
cord to prevent it from
being disconnected.
Hook
to make or answer a call.
.
.
.
(EXIT)
again.
79
Advertisement
Table of Contents
