Step4 Ip Address Setting For The Camera - JVC VN-H557U Instructions Manual

Memo :
After the [Security Information] screen appears,
0
click the [YES] button to proceed.
3 Install the camera's Built-in Viewer.
When displaying the Built-in Viewer on the
0
Internet Explorer for the first time, the plug-in
software of the Built-in Viewer is downloaded
from the camera and installed on the PC.
When the installation screen of the Built-in
Viewer (IntegratedViewer.cab add-on)
appears, install it according to the
instructions displayed.
After installation is complete, the video on
0
the camera is displayed.
When the IP address of the camera is
unknown
IP address settings cannot be changed by
accessing via a computer when the IP address
of the camera is unknown. You can use the
following method to identify the IP address.
Access the [TOOL_E] folder of the supplied
0
CD-ROM disc, and search for the camera in
the LAN using the "JVC-VN-SearchTool" of
this folder.
* For details about the [JVC-VN-SearchTool],
please read through the Readme file in the
[TOOL_E] folder.
Memo :
This camera will perform the initial operation of
0
pan/tilt/zoom upon powering on.
The settings required for running the Built-in
0
Viewer on the PC are stored in cookies.
Settings that are stored in cookies are
0
information related to the operation of the
Built-in Viewer, such as the number of the
encoder to be displayed and whether the display
size is set to a specified or variable size. Settings
related to camera operation are not stored in
cookies.
Step3 Connecting the Camera to the Computer
24
Step4 IP Address Setting
for the Camera
1 Click [Details] of Built-in Viewer.
Click
2 The [Basic Setting1] screen appears.
C
A
B
A Specify the [Network].
When selecting "DHCP Disable":
0
Select "DHCP Disable" for the [Network] option.
Then, enter required values in [IP Address],
[Subnet Mask], and [Default Gateway].
When selecting "DHCP Enable":
0
The default setting is "DHCP Disable" (DHCP
client function is disabled). To assign an IP
address from the DHCP server, connect the
DHCP server to the LAN, set the [Network] of
the camera to "DHCP Enable", and click the
[OK] button.
For details on IP addresses assigned to the
camera, consult your network administrator.
Note :
Set the DHCP server such that the same IP
0
address is always assigned to the MAC address
of the camera by the DHCP server. Connection
may fail if the above setting is not performed.