Ip Address Setting At The Computer - JVC VN-X35U Instructions Manual

Network Settings
IP Address Settings
(continued)

IP address setting at the computer

Set the computer to an IP address that enables communication with VN-X35U.
Procedures described in this item are intended for Windows XP users.
1.
Click [Start]
● Select in the sequence of [Control Panel]-[Network Connection]-[Local Area].
● Windows Vista : Select in the sequence of [Settings]-[Control Panel]-[Network and Sharing
Center]-[Manage network connections].
2.
The computer on which Internet Explorer is launched automatically selects the connected
network
● Right-click and select [Properties].
● Check to ensure that the [Client for Microsoft Networks] and [Internet Protocol(TCP/IP)] check
boxes are selected.
● Windows Vista：Check to ensure that the [Microsoft Network Client] and [Internet Protocol
Version 4 (TCP/IPv4)] checkboxes are selected.
3.
Select [Internet Protocol(TCP/IP)] and click [Properties]
Windows Vista
：Select [Internet Protocol Version 4 (TCP/IPv4)], and click [Properties]
4.
Set the IP address
5.
Click [OK] on the Local Area Connection Properties screen
28
Click
A
Select [Use the following IP address].
B
Specify the [IP address]. (For example,
use 192.168.0.100 when VN-X35U is
in its default settings and there is no
DHCP server)
Memo:
Make sure that you take note of the
original IP address before altering.
Note:
Ensure that a duplicate IP address is
not specified within the same network
environment.
C
Set [Subnet Mask] to a value that is
appropriate for the setting operation.
Consult the network administrator if
you have any queries.
(Use 255.255.255.0 when VN-X35U is
in its default settings and there is no
DHCP server)
D
When a [Default Gateway] is present,
make use of the corresponding IP
address (e.g., 192.168.0.254).