Images; Selection Of Languages On Setting - JVC VN-H557U Instructions Manual

Images

H.264 Profiles
The camera supports both the H.264 Baseline
Profile and H.264 High Profile standards.
High Profiles can maintain high image quality with
a low bit rate, but as the decoder needs to support
High Profiles, the processing load on the decoder
becomes heavier.
Compared to High Profiles, Baseline Profile offers
lower compression performance, but the
processing load on the decoder will be reduced.
Selecting High Profiles is recommended if the
decoder has sufficient processing ability.
Selection of Languages
on Setting Pages
There are two radio buttons for selecting the
language at the right top corner of the setting
pages, however the language will be automatically
set according to the OS environment of your
computer. If you select "Japanese" while using an
English-language OS, it may not be correctly
displayed because there is no Japanese
environment. Make sure to use the setting page
according to the language setting for the OS of the
computer in use.
For more details on the Settings page, refer to
0
"How to Open the Settings Page" in the
"INSTRUCTIONS" on the supplied CD-ROM.
Memo :
Once you have set a language, all information is
0
displayed in the selected language after the next
startup.
Images
16
Uploading and Downloading of the
Language File
You can change the language on settings page and
"Built-in Viewer" of the camera.
Procedure
1 Open the Settings page.
For more details on the Settings page, refer
0
to "How to Open the Settings Page" in the
"INSTRUCTIONS" on the supplied
CD-ROM.
2 Click [Download] button on the
[Maintenance] page.
3 Save "language.ini" file to the
appropriate folder in the computer.
4 Edit the downloaded "language.ini"
file using Notepad or general purpose
text editor.
Current texts are described after "=". Change
0
them to desired text.
You can write comments after the ";".
0
Comments are annotations for each line and
all the text from the ";" to the end of the line
is ignored.
Maximum number of texts in one line is 126
0
bytes.
Save the file after editing. Do not change the
0
file name.
Western European language (ISO-8859-1)
0
is supported. Multi byte character set is not
supported.
5 Click "Browse..." button on the
Maintenance page and select
"language.ini" file which you edited.
6 Click [Upload] button on the
Maintenance page.
7 Select "Custom", then click [Apply]
button on the Maintenance page.
Language is replaced after reloading the
0
[Maintenance] page. When language is not
replaced, please reload the [Maintenance]
page again.
For more details, refer to "Language File" on the
0
"[Maintenance] Page" in the "INSTRUCTIONS"
on the supplied CD-ROM.