Table of Contents
Advertisement
2. Release the burner injector with a 7 mm
socket spanner and replace it with a right
one.
3. Assemble the burner in a reverse sequence.
Before you fix the screw, make sure that the
burner is pushed correctly to the back
panel.
Test the grill injectors.
Levelling
CAUTION!
Remove all the accessories from the
oven.
1. Open the lid of the appliance and
disassemble the lid, the pan supports and
all the burner assemblies.
26
2. Put the appliance on the sidewall on a clean
and smooth surface. Place each foot into a
A
separate hole, in the plinth, and rotate it
counterclockwise.
3. If the floor is not equally flat, use the
adjustable feet on the bottom of the
appliance to set a stable position for the
appliance.
To install all the accessories, do the first step in
an opposite sequence.
Electrical installation
WARNING!
The manufacturer is not responsible
if you do not follow the safety
precautions from Safety chapters.
B
www.zanussi.com
Advertisement
Table of Contents
