Use small feet on the bottom of appliance to set
the appliance top surface level with other
The manufacturer is not responsible
if you do not follow the safety
precautions from Safety chapters.
This appliance is supplied without a main plug
or a main cable.
Applicable cable types: H07 RN-F, H05 RN-F,
H05 RR-F, H05 VV-F, H05 V2V2-F (T90), H05
Covering terminal board
• The recommended cross-section area is six
square millimetres (6 mm²).
Recycle the materials with the symbol
the packaging in applicable containers to
recycle it. Help protect the environment and
human health and to recycle waste of electrical
and electronic appliances. Do not dispose
appliances marked with the symbol
household waste. Return the product to your
local recycling facility or contact your municipal
• When you refit the mains terminal cover,
make sure that the lower tabs are located
inside the bottom edge of the aperture,
before you fix the two screws into the top
edge of the mains terminal cover.
• Make sure that the cover is securely
To open the cover of terminal board
obey the procedure in opposite
Do not remove blanking plates.
Make sure that the links are fitted as shown.