JVC VN-V686U Instructions Manual page 40

Setting Using Internet Explorer
Setting (continued)
Camera Page (contiuned)
H
Stabilizer
40
This function prevents image shaking caused by vibration.
Set this function to AOnB to control image shaking.
Off : Disabled.
On : Enabled.
:
Memo
● When the function is set to AOnB, the screen is enlarged to approximately
1.3 times.
● Adjustment is disabled in the electronic zoom area.
● Adjustment is disabled for about 1 minute after power ON and during
Pan/Tilt/Zoom operation.
● Adjustment may not work when the vibration is fast. The effect can be
small when vibration direction does not match with Pan/Tilt position.
Depending on the installation environment, the stabilizer may malfunction
and increase image shaking due to the vibration transmitting to the
camera. In this case, set the stabilizer to AOffB.
A
B
C
D
E
F
G
H
I
J
K
L
M