JVC VN-V686U Instructions Manual page 108

Settings and operation of Built-in Viewer
PTZ Controller Operation
(contiuned)
Operation (contiuned)
E
Pan/Tilt manual
operation button,
[Home] button
F
Speed
Pan/Tilt
Focus/Zoom
G
Variable Speed
H
B/W Mode
108
Click the arrow button to move the camera in that direction. Release the
button to stop the movement.
Click the [Home] button to move to the home position.
This item sets the operation speed.
This item sets the operation speed of the Pan/Tilt manual operation button
E.
Increase the number to increase the operation speed.
[Setting range:1 to 8]
This item sets the operation speed of the [Zoom] operation button D and the
[Focus] operation button L.
Increase the number to increase the operation speed.
[Setting range:1 to 4]
This function adjusts the Pan/Tilt operation speed by the zoom ratio.
Select the checkbox to slow down at Tele and to move quickly at Wide.
Deselect the checkbox to always move the camera at the speed configured
under the [Speed] item F of Pan/Tilt regardless of the zoom ratio.
This sets the function to switch from Color to B&W mode.
Color : Always be in Color mode.
Black & White
: Always be in B&W mode.
Auto Low,Auto Mid,Auto High
: This item automatically switches between Color Mode and
B&W Mode when the luminance meets defined conditions over
30 seconds. Select the sensitivity from three options.
:
Memo
To ensure a successful B&W/Color switching
● If the [B/W Mode] item is set to AAuto Low, Auto Mid, Auto HighB, the
B&W/Color setting can be switched according to the brightness of the
object, but the condition of illumination and field angle may make this
impossible. To be absolutely certain of B&W/Color switching,
connecting external sensor to alarm input cable of this camera and
setting alarm action of B&W mode is recommended.