To Add / Program New Menu Items; To Add / Program An [Option Menu - Clam] - Garland MWEFH-9501 Operation Manual

TO ADD / PROGRAM NEW MENU ITEMS

To Add / Program an [Option Menu - CLAM]

1. PRESS and HOLD the "PROG" button for five, (5),
seconds. (Display will flash GC450 and the program
version number).
2. PRESS the "PROG" button twice to display
"SYSTEM SETUP."
3. PRESS and HOLD the "UP ARROW" button ( ↑ )
for ten (10) seconds, "GAP CALIBRATION" will be
displayed.
4. PRESS the "PROG" button twice to display "MENU
ITEMS."
5. PRESS the "MENU" button to display "OPTIONAL
MENU (1)(2)(3) Clam".
6. PRESS the "UP ARROW" button ( ↑ ) to change
"Y/N".
7. PRESS the "FUNCTION" button to obtain
"REMOVE IN XXX".
8. PRESS the "UP ARROW" button ( ↑) to obtain the
desired number (O - 9).
9. PRESS the "RIGHT ARROW" button (→) to move
the cursor, (blinking digit), to the required digit
position.
10. PRESS the "FUNCTION" button to display "ALARM
".
11. PRESS the "UP ARROW" button ( ↑ ) to change the
setting (AUTO/MANUAL).
12. PRESS the "FUNCTION" button to display "TOP
TEMP". Top Temp. Default = OFF.
13. PRESS the "UP ARROW" button ( ↑ ) to change the
value of the flashing digit.
14. PRESS the "RIGHT ARROW" button ( → ) to
advance the cursor to the right for changing its value.
15. PRESS the "FUNCTION" button to display
"BOTTOM TEMP XXX". Bottom Temp. Default =
OFF.
16. PRESS the "UP ARROW" button ( ↑ ) to change the
value of the flashing digit.
PROGRAMMING
MENU ITEMS
17. PRESS the "RIGHT ARROW" button ( → ) to advance
the cursor to the right for changing its value.
18. PRESS the "FUNCTION" button to obtain "GAP
SETTING".
19. PRESS the "UP ARROW" button ( ↑ ) to change the
value of the flashing digit.
20. PRESS the "RIGHT ARROW" button ( → ) to advance
the cursor to the right for changing its value.
21. PRESS the "FUNCTION" button to obtain display
"OPTIONAL MENU CLAM". To Label the New
menu:
22. PRESS the "UP ARROW" button ( ↑ ) to change the
value of the flashing digit.
23. PRESS the "RIGHT ARROW" button ( → ) to advance
the cursor to the right for changing its value. (Alpha-
numeric capabilities).
24. PRESS the "PROG" button to display "MENU
ITEMS".
25. PRESS the "RIGHT ARROW" button (→) to return to
the normal OPERATING MODE.