To Add/Program Optional Menu Flat - Garland MWGH-9501 Operation Manual

9. PRESS the "RIGHT ARROW" button (→) to
move the cursor, (blinking digit), to the required
digit position.
10. PRESS the "FUNCTION" button to display
"ALARM ".
11. PRESS the "UP ARROW" button ( ↑ ) to change
the setting (AUTO/MANUAL).
12. PRESS the "FUNCTION" button to display "TOP
TEMP". Top Temp. Default = OFF.
13. PRESS the "UP ARROW" button ( ↑ ) to change
the value of the flashing digit.
14. PRESS the "RIGHT ARROW" button ( → ) to
advance the cursor to the right for changing its
value.
15. PRESS the "FUNCTION" button to display
"BOTTOM TEMP XXX". Bottom Temp. Default =
OFF.
16. PRESS the "UP ARROW" button ( ↑ ) to change
the value of the flashing digit.
17. PRESS the "RIGHT ARROW" button ( → ) to
advance the cursor to the right for changing its
value.
18. PRESS the "FUNCTION" button to obtain "GAP
SETTING".
19. PRESS the "UP ARROW" button ( ↑ ) to change
the value of the flashing digit.
20. PRESS the "RIGHT ARROW" button ( → ) to
advance the cursor to the right for changing its
value.
21. PRESS the "FUNCTION" button to obtain display
"OPTIONAL MENU CLAM". To Label the New
menu:
22. PRESS the "UP ARROW" button ( ↑ ) to change
the value of the flashing digit.
23. PRESS the "RIGHT ARROW" button ( → ) to
advance the cursor to the right for changing its
value. (Alpha-numeric capabilities).
24. PRESS the "PROG" button to display "MENU
ITEMS".
25. PRESS the "RIGHT ARROW" button (→) to
return to the normal OPERATING MODE.

To Add/Program Optional Menu Flat:

1. PRESS and HOLD the "PROG" button for five, (5),
seconds. (Display will flash GC450 and the
program version number).
2. PRESS the "PROG" button once to display "MENU
ITEMS."
3. PRESS the "MENU" button to display "OPTIONAL
MENU (1)(2)(3) Flat".
4. PRESS the "UP ARROW" button ( ↑ ) to change
"Y/N".
5. PRESS the "FUNCTION" button to obtain "SEAR
IN XXX".
6. PRESS the "UP ARROW" button ( ↑) to obtain the
desired number (O - 9).
7. PRESS the "RIGHT ARROW" button (→) to move
the cursor, (blinking digit), to the required digit
position.
8. PRESS the
"ALARM ".
9. PRESS the "UP ARROW" button ( ↑ ) to change
the setting (AUTO/MANUAL).
10. PRESS the "FUNCTION" button to obtain "TURN
IN XXX".
11. PRESS the "UP ARROW" button ( ↑) to obtain the
desired number (O - 9).
12. PRESS the "RIGHT ARROW" button (→) to move
the cursor, (blinking digit), to the required digit
position.
13. PRESS the
"ALARM ".
14. PRESS the "UP ARROW" button ( ↑ ) to change
the setting (AUTO/MANUAL).
15. PRESS the
"REMOVE IN ".
16. PRESS the "UP ARROW" button ( ↑) to obtain the
desired number (O - 9).
17. PRESS the "RIGHT ARROW" button (→) to move
the cursor, (blinking digit), to the required digit
position.
23
"FUNCTION" button
"FUNCTION" button to display
"FUNCTION" button
to display
to display