Lennox CLIMATIC 40 User Manual page 8

An electronic device that controls aircoolair / compactari / flatair units (air-air units) and aircube units (condensing units)

Hide thumbs Also See for CLIMATIC 40:

Table of Contents

Access to the menu:

A) PROBES DISPLAY MENU

B) SETPOINT SETTINGS AND OPERATING HOURS DISPLAY MENU

C) PARAMETERS EDITING MENU

5 sec.



To go to different values in the menu, proceed as above, the:

Press the "

sec.



" b01" or "b02", appears on the display (depending on the unit's configuration).

Once the probe is selected, after a few seconds, "b0" turns into its temperature/

pressure measure.

Press " Sel " button for 5 seconds.

", appears on the display.

Move inside the menu as explained below.

5 sec.

a) Press " Pgr " and " Sel",

at the same time, for 5

seconds.

c) Press " Sel ", to accept.

Go up a sub-group inside

the programming area.

Go down a sub-group or accept

parameter modifications inside

the programming area.

" button to enter probes display menu.



b) Set password " 22 " by the

" and "

d) Press " Sel ", to enter

parameters Editing menu.

UP or increase valve.

Down or decrease valve.

" buttons.

Table of Contents