DESCRIPTION OF CONTROLS
a) Enter time bands menu.
3 sec.
d) Set
time band of weekday start minutes.
ST
Flashing
g) Accept.
NOTE: You must set the DC40 clock before programming time bands.
Time bands programs keep current operating mode (if it was in cool mode, it keeps working in cool mode; if it was in auto
matic mode, it keeps working in automatic mode, etc.).
CONFIGURATION
b) Set
time band for weekday start hour.
ST
Time band
e) Accept.
h) Repeat steps b-c-d-e-f-g to programme 2
band for weekdays.
Time band 2
ACTIVATION
DEACTIVATION
Weekdays
flashing
time
nd
Flashing
EXAMPLE IN SUMMER
8:00 (Time band )
8:00 (Time band 2)
6
c) Accept.
f) Set
time band of weekday set point (on/off/tem-
ST
perature).
Flashing
i) Repeat steps b-c-d-e-f-g-h to programme the two
time bands for weekends.
Weekend
Flashing
Hour
Weekdays
23ºC
23ºC
Weekend
OFF
OFF