Table of Contents
Advertisement
4.1 instant one-touch recording and playback
Insert an external high-speed storage device and make sure the device has enough free space. Select the TV
programme you wish to record. Press 4 to enter into PVR mode and start recording. The PVR control bar on
the screen shows as in fig. 6, you can select the settings of your choice. If the PVR function cannot be realized,
try to format your USB device. If you wish to stop the recording, press 3 and the recording will stop.
noTe:
If the signal is interrupted or removed while in record, the record will stop until the signal is
„
„
established. This may cause you to lose programme content.
Please do not turn the TV OFF during recording. This will make the TV exit the PVR and turn to
„
„
standby.
4.2 Timer recording
Go to the channel that will broadcast the programme you want to record. Press ePG on your remote
control to bring up the EPG interface. The channel you are watching will be highlighted on the screen
that appears. Press the ReD button on the remote control, then enter into the programme details on
the recorder menu by pressing p q to select an item and t u to change the setting. For example, if
the programme starts at 8:30 pm on the same day, enter 30 in the space for MINUTES, 20 in the space
for HOURS (a 24 hour clock applies) and then the relevant date. Use the same method for entering the
finish time. Choose the recording mode: Once, Daily or Weekly. Press enTeR to confirm your selection. A
schedule of all your recordings (the schedule list) will appear. See chapter 3.3 for more on the schedule.
The recording will be active also in Standby mode.
noTe:
If you are browsing the EPG, follow the steps on the EPG function page.
4.3 electronic Programme Guide (ePG)
EPG stands for Digital Electronic Programme Guide. It is supplied by the programme providers and offers
information on broadcasted the programmes. You can access it in digital mode by pressing ePG on the
remote control.
Press ePG to bring up the EPG interface. The second bar from the top will display the current date and
time. On the list below, the channel you are currently watching will be highlighted. Before you can
view any EPG information, you have to 'activate' every channel for which you want to view programme
information. To do this, use p q to select a channel, then press enTeR to confirm.
To check programmes to be broadcasted on a future date, scroll up to the date field with p. Use u to
select the date you want to check. Press 1/2 to scroll up to the top bar in the display, then press the
button to select the Channel List. The second bar will then display one of your available channels. Go
to the channel and use t u to select the channel for which you want to view information. After a brief
moment, the programme information will appear.
Use p q to scroll through the time slots. Press MenU to exit the EPG menu.
During the record mode, you cannot change channels or select another function.
A recording is possible only if a USB device is connected.
Fig. 6
9
Advertisement
Table of Contents
