4.6.3
Transfer the whole system to onboard eMMC
1.
Open a debug console
2.
Boot up from the SD card
Perform the following command:
root@PcName:~# cd /data/mkimage /scripts
root@PcName:~# ./mkmmc?android.sh /dev/block/mmcblk0
3.
Remove the SD card, then RSB-6410 can boot up from the onboard eMMC.
4.7
Customization
4.7.1
Config Android Kernel
1.
Open a terminal console and change directory to BSP scripts folder
2.
Perform the following command:
root@PcName:~# cd android/kernel_imx
root@PcName:~# make ARCH=arm menuconfig
3.
Linux Kernel configuration shows up as below:
RSB-6410 Android User Manual
52