Table of Contents
Advertisement
6
UTILITY PACKAGE (GX Configurator-CT)
[Explanation of items]
(1) Items
Setting item
Current value : Monitors the I/O signal states and present buffer memory values.
Setting value : Enter or select values to be written into the buffer memory for test
(2) Command buttons
Remark
: Displays I/O signals and buffer memory names.
operation.
/
The following describes an example when [Execute test] settings are changed as
follows:
• Period setting: 3000 ms
• Periodic pulse counter start command (Y05): ON
(1) Click [Setting value] field for [CH
(2) After inputting a period [unit: 10 ms] (input "300" in case of the above
example), press the
At this moment, the input value has not yet been written to the QD63P6.
(3) Select [ON] in [Setting item] field of [CH
command (Y05)].
(4) Select the [Setting value] fields input in (1) to (3) while pressing the
key. Dragging operation using the mouse can also select multiple items.
(5) Click the
After the writing, the written value is updated in the [Current value] field.
Displays the current value of the item selected. (This is
used to check the text that cannot be displayed in the
current value field. However, in this utility package, all
items can be displayed in the display fields).
Creates a file containing the screen data in text file
format.
Selects whether or not to monitor current values.
Performs a test on the selected items. To select more
than one item, select them while holding down the
key.
Ctrl
Closes the screen that is currently open and returns to
the previous screen.
Period setting] to select it.
key.
Enter
Periodic pulse counter start
button for writing.
6.6 Monitoring/Test
6.6.1 Monitoring/Test
1
2
3
4
5
6
Ctrl
7
8
6
- 20
Advertisement
Table of Contents
