Table of Contents
Advertisement
3
SPECIFICATIONS
(5) Present value A (Un\G10 and 11) and present value B (Un\G200 and 201)
(6) Overflow detection flag (Un\G12)
• The present counter value is stored in this area.
• Select the present value A (Un\G10 and 11) to read such as the present value
and overflow detection flag (Un\G12) for each channel, and select the present
value B (Un\G200 and 201) to read the present values of multiple channels at a
time. Set the storage location (present value A/present value B) with the
intelligent function module switch. (Refer to Section 4.5.)
• The range of a value to be read is from -2147483648 to 2147483647 (32-bit
signed binary).
A
B
Count enable command
(Y04)
Present value A
(Un\G10 and 11)
Figure 3.5 Timing chart for the present value A (Un\G10 and 11)
• Overflow occurrence status is stored in this area when the counter format is the
linear counter (refer to Section 5.2.2).
• According to the overflow occurrence status, 0 (No detection) or 1 (Overflow
occurred) is stored to the overflow detection flag (Un\G12).
• This flag operates as follows. (when the pulse input mode is 1 multiple of 1
phase)
Performed by the QD63P6.
A
B
Present value A
2147483646
(Un\G10 and 11)
Overflow detection flag
0
(Un\G12)
Preset value setting
(Un\G4 and 5)
Preset command
(Y02)
Error code
(Un\G20)
Figure 3.6 Timing chart for the overflow detection flag (Un\G12)
ON
0
1
2147483647
0
1
0
0
ON
0
100
3.4 Buffer Memory Assignment
3.4.2 Details of the buffer memory
2
1
3
- 14
1
2
3
4
5
6
7
8
Advertisement
Table of Contents
