Table of Contents
Advertisement
[WIRING PRECAUTIONS]
Always ground the shielded cable on the encoder side (relay box).
Failure to do may cause a malfunction.
Correctly wire cables to the module after checking the rated voltage and terminal layout of the
product.
Connecting a voltage different from the rated voltage or incorrect wiring may result in a fire or failure.
[STARTUP/MAINTENANCE PRECAUTIONS]
Do not disassemble or remodel each of the modules.
Doing so may cause failure, malfunctions, personal injuries and/or a fire.
Be sure to shut off all phases of the external power supply used by the system before mounting or
removing the module.
Not doing so may result in a failure or malfunction of the module.
Do not mount/remove the module onto/from the base unit more than 50 times (IEC 61131-2-
compliant), after the first use of the product.
Doing so may cause malfunctions.
Do not touch the terminal while the power is ON. Failure to do may cause a malfunction.
Switch off all phases of the externally supplied powerused in the system when cleaning the module
or retightening the terminal or module fixing screws.
Not doing so may result in a failure or malfunction of the module.
If the screw is too loose, it may cause a drop, short circuit or malfunction.
Excessive tightening may damage the screw and/or the module, resulting in a drop, short circuit or
malfunction.
Before handling the module, touch a grounded metal object to discharge the static electricity from
the human body.
Not doing so may result in a failure or malfunction of the module.
[DISPOSAL PRECAUTIONS]
When disposing of this product, treat it as industrial waste.
CAUTION
CAUTION
CAUTION
A
- 3
Advertisement
Table of Contents
