Brocade Icx 7450 Stack Construction Methods With 4X10G Stacking Ports - Brocade Communications Systems ICX 7450 Deployment Manual

Brocade ICX 7450 Stack Construction Methods with 4x10G Stacking Ports

Standby u2 - protocols ready, can failover
Current stack management MAC is cc4e.246c.ffd0
ICX7450-24 Router#
Brocade ICX 7450 Stack Construction Methods with 4x10G Stacking
Ports
Two ways of constructing a stack are as follows:
1. Use the 'secure setup' utility to form the stack.
2. Manual stack formation where each unit is configured individually.
Topology
The figure below shows the rear of three units connected in a linear topology using stack trunks.
Similarly, a stack of up to 12 units can be connected. The example presented here for configuration is
for a 12-unit stack. Please refer to Bill of Materials, table 2 and table 3 for the software image, optics
and vendor information.
FIGURE 9 Brocade ICX 7450 three unit stack connected in linear topology using 4x10G stacking ports
TABLE 4
Units
Unit1 to Unit2
Unit2 to Unit3
20
+---+ +---+
3/1| 1 |4/1--3/1| 2 |4/1--3/1| 3 |4/1--3/1| 4 |4/1--3/1| 5 |4/1--3/1| 6 |4/1-
+---+ +---+
+---+ +---+
4/1| C |3/1--4/1| B |3/1--4/1| A |3/1--4/1| 9 |3/1--4/1| 8 |3/1--4/1| 7 |3/1-
+---+ +---+
Stacking connections in Brocade ICX 7450 three unit stack
Brocade ICX 7450, Brocade ICX 7750, and Brocade ICX 7250 Stacking Deployment Guide
+---+ +---+
+---+ +---+
+---+ +---+
+---+ +---+
Links/Trunks
1/2/3 to 2/2/3
1/2/4 to 2/2/4
2/2/1 to 3/2/1
2/2/2 to 3/2/2
+---+ +---+
+---+ +---+ |
|
|
+---+ +---+ |
+---+ +---+
53-1003581-03