Brocade Icx 7450 Stack Construction Methods With 1X40G Stacking Ports - Brocade Communications Systems ICX 7450 Deployment Manual

12 unit stack linear and ring topology
12 unit stack linear and ring topology
Brocade ICX 7450 Stack Construction Methods with 1x40G Stacking
Ports
Two ways of constructing a stack are as follows:
1. Use the 'secure setup' utility to form the stack.
2. Manual stack formation where each unit is configured individually.
Topology
The figure below shows the rear view of the three units connected in a linear topology. Similarly a
stack of up to 12 units can be connected. The example presented here for configuration is for 12 unit
stack. Please refer to the Bill of Materials section later in this document for the software image, optics,
and vendor information
12 Brocade ICX 7450, Brocade ICX 7750, and Brocade ICX 7250 Stacking Deployment Guide
53-1003581-03