Door Glass - AEG 37699MO-MN User Manual

14 www.aeg.com
How to clean the inner oven

door glass

One of the features of our cookers is that
the inner oven door glass can be easily
removed for cleaning without the aid of
specialized personnel. Just open the oven
door and remove the support securing the
glass (fig.4).
Caution: This operation can be
done also with the door fitted on
appliance, but in this way, pay
attention that when the glass is
pull upwards, the force of the
hinges can close the door roughly.
LOCK AT LEAST ONE HINGE (fig. 6)
To reassemble the glass, proceed
in the reverse order, being careful
not to pinch your fingers. (fig. 5)
fig.4
fig. 5
Oven door removal
The oven door can be removed to give
easier access to the oven when cleaning.
To remove, proceed as follows:
• Open the oven door and insert rivet
or nail (R), not supplied, (diam. 2 mm
lenght 30 mm) in the hole (F) of the
hinge (fig. 6).
MIND YOUR FINGERS
• Partially close the door, forcing it
upwards at the same time to free
stop tooth and hinge sector.
• Once the hinge is free, pull the door
forwards tilting it slightly upwards to
free sector.
• To reassemble proceed in the reverse
order, paying attention to the correct
position of sectors.
R
fig. 6
Replacing the oven lamp (fig.7)
Ensure the appliance is switched off
before replacing the lamp to avoid the
possibility of electric shock.
In the event one or both oven lamps
need replacing, the new lamps must
comply with the following requisites: 15
W - 230 V~ - 50 Hz - E 14 - and must be
resistant to high temperature (300°C).
• Draw out the side guide rails as
described later. Then, remove the
glass protection cap
socket, lifting it with a screwdriver
placed between the cap and the oven
wall and replace the lamp
• Fit the accessories back in reverse
order.
fig.7
F
2 from the bulb
1 .