Onboard Power Led; 5-10 Sata Connections; Sata 3.0 Ports - Supermicro 6018R-WTR User Manual

Onboard Power LED

An Onboard Power LED is located
at LED2 on the serverboard. When
this LED is on, the system is on. Be
sure to turn off the system and unplug
the power cord before removing or
installing components. See the tables
at right for more information.
Note: Refer to Page 2-21 for information on the rear UID LED (LED1).

5-10 SATA Connections

SATA 3.0 Ports

There are ten SATA 3.0 (I-SATA 0-5
& S-SATA0-3) on the serverboard.
I-SATA ports are supported by the
Intel PCH C612, and S-SATA ports
are supported by the Intel SCU chip.
These SATA ports provide serial-link
signal connections, which are faster
than the connections of Parallel ATA.
See the table on the right for pin
defi nitions.
Note: For more information on SATA HostRAID confi guration, please refer to the
Intel SATA HostRAID User's Guide posted on our website @
com..
Chapter 5: Advanced Serverboard Setup
Onboard PWR LED Indicator
LED Color
Off
Green
Green:
Flashing Quickly
SATA Connectors
Pin Defi nitions
Pin# Signal
1 Ground
2 SATA_TXP
3 SATA_TXN
4 Ground
5 SATA_RXN
6 SATA_RXP
7 Ground
5-25
LED States
Defi nition
System Off (PWR cable not
connected)
System On
ACPI S1 State
ftp://ftp.supermicro.