Supermicro 6018R-WTR User Manual page 64

SUPERSERVER
Jumper Description
JBT1 Clear CMOS
2 2
JI C1/JI C2 SMB to PCI-E slots
JPB1 BMC Enable
JPG1 VGA Enable
GLAN1/GLAN2 Enable (X10DRW-i)
JPL1
10G_LAN1/10G_LAN2 Enable (X10DRW-iT)
JPME2 Manufacture (ME) Mode Select
JWD1 Watch-Dog Timer Enable
LED Description
LED1 Rear UID LED
LED2 Onboard PWR LED
LEDM1 BMC Heartbeat LED
Note 1: For SXB1A/SXB1B/SXB1C PCI-E slot to work properly, please use an
SMC-proprietary riser card (eg. RSC-R1UW-2E16) in the slot
Note 2: For SXB2 (CPU2 PCI-E 3.0X16) slot to work properly, please use the SMC-
proprietary riser card (PN: RSC-R2UW-2E8R).
Note 3: CPU2 needs to be populated for PCIe SXB2 and SXB1B (lower left) slots
to be functional.
Note 3: For the latest CPU/memory updates, please refer to our website at
www.supermicro.com/products/serverboard.
6018R-WTR(T) USER'S MANUAL
X10DRW-i(T) Jumpers
X10DRW-i(T) LED Indicators
Default Setting
See Chapter 3
Pins 2-3 (Disabled)
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Pins 1-2 (Normal)
Pins 1-2 (Reset)
State Status
Blue: On Unit Identifi ed
On System Power On
Green: Blinking BMC Normal
5-14
http://