Table of Contents
Advertisement
1 Introduction | 1.4 Intended Use
8
1.4 Intended Use
Primotech microscopes are all-purpose light microscopes primarily designed for
industrial applications such as:
¢
Metallurgy
¢
Electronics
¢
Geoscience
Primotech microscopes are also designed for use in education.
Primotech microscopes, including their original accessories, must not be used for
microscopic techniques other than those described in the Instruction Manual. Using
the microscope for any other purpose is not allowed and could be hazardous.
Do not operate Primotech microscopes or any accessories in potentially explosive
areas, in the presence of volatile anesthetics, or in the presence of combustible
solvents, such as alcohol, benzene, or similar chemicals.
INFO
The Safety Information document is also considered to be part of the Primotech
microscope. You must follow all the instructions provided in this document.
Primotech microscopes have been designed, produced, and tested in compliance
with the standard DIN EN 61010-1 (IEC 61010-1) "Requirements for Electrical
Measuring, Control, and Laboratory Instruments".
Primotech microscopes meet the requirements of EU directive 2006/95/EC
Appendix 1 and carry the mark.
Radio interference suppression complies with DIN EN 61326-1.
Primotech microscopes must be disposed of in accordance with the WEEE Directive
2012/19/EC. For more information on disposal and recycling please consult your
ZEISS representative.
Primotech | Document 430055-9044-008 V.1.0; 03 / 2014
Advertisement
Table of Contents
