Disposal Of Primotech; Warranty - Primotech MAT Instruction Manual

7 Maintenance and Disposal | 7.5 Disposal of Primotech
48
10 Unplug the cables between the tube and the rear of the microscope:
– Network cable between the network port of the tube and the top of the
MNA
– 12 V power cable between the power socket of the tube and the rear of
the microscope stand
This does not apply to the Primotech D/POL Conoscopy.
11 Place the microscope stand in its original packaging or the case for transport
and storage.

7.5 Disposal of Primotech

Electronic equipment must not be disposed of in the domestic waste. It has to be
disposed according to your national regulations and guidelines.
Samples inspected using Primotech must be disposed according to the valid legal
standards and company regulations.

7.6 Warranty

The manufacturer guarantees that the instrument has no material or production
defects when delivered. You must inform us of any defects immediately and do
everything to minimize any damage. If the manufacturer is informed of such a
defect, he is obligated to rectify it; it is his decision whether he does this by
repairing the instrument or by delivering an instrument free of any defect. No
guarantee is provided for defects caused by natural wear (wearing parts and
consumables in particular) and improper use.
The instrument manufacturer is not liable for damage caused by faulty operation,
negligence, or any other tampering with the instrument, particularly the removal or
replacement of instrument components, or the use of accessories from other
manufacturers. This invalidates all warranty claims.
With the exception of the work specified in this manual, no maintenance or repair
of Primotech may be undertaken. Repairs may only be performed by a ZEISS
representative. Should any defect occur with the instrument, please contact your
ZEISS representative.
Primotech | Document 430055-9044-008 V.1.0; 03 / 2014