Table of Contents
Advertisement
7 Maintenance and Disposal | 7.2 Corrective and Preventive Maintenance
Cleaning Other Surfaces To clean all other surfaces except the optical surfaces:
Procedure 1
Replacement Parts Primotech does not require scheduled preventive maintenance by a ZEISS
46
Switch the device off completely and pull the mains plug.
2
Wipe the surfaces with a clean cloth moistened with water to which a small
amount of cleaning agent has been added.
– Do not use a solvent.
– Make sure that no fluid enters the system.
3
Dry the surfaces with a lint-free cloth.
INFO
The device manufacturer cannot be held responsible for damage caused by
improper use, negligence, or unauthorized intervention in the system, in
particular removal or replacement of device components or the use of
unsuitable accessories from other manufacturers. Such actions will render all
warranty claims invalid.
7.2 Corrective and Preventive Maintenance
To maintain the availability and performance of your Primotech system at a fully
predictable budget we recommend you enter into a Protect service agreement with
your ZEISS representative.
Damaged devices or components may only be repaired or replaced in accordance
with the manufacturer's maintenance specifications. This may include the exchange
of components by the end user.
Modifications to and retrofitting of system components may only be carried out in
accordance with manufacturer's specifications. Such actions may need to be carried
out by the manufacturer, ZEISS representative, or persons authorized and trained
for the purpose by the manufacturer.
representative. Worn or defective components can be replaced by the end user.
Please contact your ZEISS representative to order a replacement. After receiving the
replacement, please use the corresponding packaging material to return the
defective component.
Primotech | Document 430055-9044-008 V.1.0; 03 / 2014
Advertisement
Table of Contents
