Adjusting The Condenser Settings; Overview; Specifying The Condenser Position - Primotech MAT Instruction Manual

4 Adjusting the Condenser Settings | 4.1 Overview
Procedure 1
Primotech | Document 430055-9044-008 V.1.0; 03 / 2014

4 Adjusting the Condenser Settings

4.1 Overview

This chapter describes how to adjust properties of the condenser, such as its
position, maximum height, and how to set the optimum contrast. Only the
following microscopes have a condenser:
¢
Primotech D/A MAT
¢
Primotech D/A POL
¢
Primotech D/POL Conoscopy

4.2 Specifying the Condenser Position

The condenser is located beneath the stage. It concentrates the light from the light
source into a cone that illuminates the specimen with uniform intensity over the
entire field of view.
To raise or lower the condenser, turn the condenser vertical adjustment knob.
2 Raise the condenser carefully and ensure that it does not collide with the
bottom of the sample.
!
27