Install A Comfort Wired Handset; Hdmi Connector - Alcatel-Lucent 8088 User Manual

1.7 Install a comfort wired handset

You can install a wired handset in place of the Bluetooth® Wireless Handset.

Remove the rubber.

Plug-in the wired handset to the appropriate connector (refer
to phone description).
Make sure you position the cable correctly in the
compartment intended for that purpose:

Switch off the Bluetooth® Wireless Handset (press and hold
the On/Off hook key until you hear two distinct tones).

1.8 HDMI connector

Your set is equipped with an HDMI 1.4 output for a better video experience.
The 8088 Smart DeskPhone can be connected to a large screen or video projector. Moreover, an
external camera can be connected to the phone to broadcast the entire room. Your deskphone can
easily find its place in a meeting room.
There are two ways to use the HDMI connector:

Broadcast the video conversation (HD capability).

Broadcast the entire display of the phone.
Your set has to be connected to the appropriate equipment.
Broadcast the video conversation (HD capability)

Use one of the following:
o During the video conversation, swipe up on the video
displayed on the phone to broadcast it to the
equipment connected via HDMI.
o To stop the broadcast, swipe down on the video
displayed on the phone.
Select the HDMI button.
Broadcast the entire display of the phone
To broadcast the entire display of the phone or stop the broadcast, you have to activate or deactivate
this feature:

Settings

Device Display

Activate or deactivate the HDMI output

Back to homepage.
8AL90333ENAAed01
Clone display to HDMI
53
14 /