York Fitness Heritage c102 Owner's Manual page 9

7. Attach the seat and seat post
1. Attach the seat to the seat post as shown
- (nuts and washers are located in the
underside of the seat)
2. Slide the seat post into the seat post
mounting tube and secure in position
with the hand wheel
8. Attach the pedals
1. Attach the straps to the pedals (the straps and
pedals are marked L and R, match each strap to
the corresponding pedal)
2. Attach the L pedal to the left crank arm - this
pedal will thread on anti-clockwise
3. Attach the R pedal to the right crank arm - this
pedal will thread on clockwise
Final Checks
Your cycle is now assembled. Please make the following final checks before you use it for the first time
•
Make sure all screws / bolts are tightened
•
Make sure you have positioned it on a flat, level surface
22
26
22
26
FIXINGS: FIXINGS:
Part
No.
22
x 3
Part
No.
26
x 3
9